All About Aurora Postage Stamp Trains
4111-250: Kit Parts

Note that a number of parts are prone to damage if the kit is not packed carefully; they are identified below.

The fine part on the left end of the tree above is easily broken. It's best to repair this part before removing it from the tree.

The thin frame part above left will become warped or distorted (as in this case) if the kit is not packed carefully. The clear part that fits within it can help correct the problem.

The thin extensions on the far left ends of the walls above, and to a lesser extent the one at top right, are easily snapped off. If the small bits that break off are lost, it's a major issue.

Typically the part to the far right is snapped off of the tree above, likewise one or both of the narrow parts at top and bottom on the tree below.

See Also...

Return to: 4111-250 | Buildings and Bridges

Postage Stamp Trains is a Trademark of the Aurora Plastics Corporation.
Website Copyright 2017-2018 by David K. Smith. All Rights Reserved.
Corrections and contributions greatly appreciated. Thank you!
Top of Page | Home | Site Map